Lumberjack PRO SERIES 12" Floorstanding Bandsaw with Induction Motor

Name: TOOLSAVE
Telephone: +44 (0)1902 450 470

Product Code: LUM00054

Brand: Lumberjack
MPN: BS305
Barcode: 5060429095808
Category: Power Tools, Bandsaws, Bandsaws
Type: Floor Standing
Voltage: 240V
Size: 12"
Download PDF Manual

A floorstanding woodworking bandsaw with a cutting capacity of 165mm (61/2"), big enough for most workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The Lumberjack BS305 has three bearings on the blade guard. The two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

£599.99 £499.99

Lumberjack Circle Cutting Jig Accessory For Bandsaws BS305

£34.95

Quantity

Starrett Bandsaw Blade 2240mm x 13mm x 6TPI for BS305

£19.99

Quantity

Starrett Bandsaw Blade 2240mm x 6mm x 6TPI for BS305

£18.99

Quantity

The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with an LED work light on a flexible stem, so that the work area will always be well lit.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Maximum cutting depth – 165mm

Throat width: 305mm

Table Size: 480mm x 390mm

Table height: 1000mm

Table tilt: 0-45 degrees

Cutting speed: 800 and 370m/min

Motor (induction) 750W (1hp)

Blade length: 2240mm

Blade width: 6-20mm

Dimensions (WxDxH) 790mm x 580mm x 1600mm

Weight: 67kg

Floorstand

Rip fence

Mitre fence

LED work light

1 x blade 13mm 4TPI

Download PDF Manual

Features

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

Specification

Includes

Manual

Video

Welcome

Thank you for visiting our Toolsave Website.

Toolsave is a family run business and became a Limited Company on the April 23rd, 2004: company registration number 05109987. Our family has been in the retail trade for over 30 years, we, therefore, have strong foundations in customer care and satisfaction.

We have seen year on year of successful growth and are fast becoming one of the leading power and Hand Tool sellers within the UK.

Information

Customer Service

Contact Us

Toolsave

Unit C
Manders Ind. Est.
Old Heath Road
Wolverhampton
WV1 2RP

+44 (0)1902 450 470
sales@toolsave.co.uk

Lumberjack PRO SERIES 12" Floorstanding Bandsaw with Induction Motor

Features

Specification

Includes

Manual

Video

Out of stock

Out of stock

Out of stock

Welcome

Information

Customer Service

Contact Us

Lumberjack PRO SERIES 12" Floorstanding Bandsaw with Induction Motor

Features

Specification

Includes

Manual

Video

Related Products

Out of stock

Out of stock

Out of stock

Welcome

Information

Customer Service

Contact Us